LED Motorcycle Mirrors with Turn Signals from
Chrome Glow....a leader in custom motorcycle lighting.
LED motorcycle mirrors and turn signals could very well save
your life. Your every move must be clearly seen by all other
motorists. The more lighting the better. The solution is our
selection of LED mirror sets featuring LEDs on one or both
sides of the mirrors. Some function as
both running lights and turn signals
Rivco LED Turn Signal Motorcycle
Mirrors
Model 1222
Features: - Super-bright LEDs on both sides.
- LEDs are "sunlight visible".
- Crystal clear lenses
- Triple Chrome plated or Black Satin finish.
- Simple bolt-on, plug-in installation
- Increased visibility and safety.
- Notifies when signal is left on
- Anti-vibration design for clearer vision
- Front LEDs act as running & turn signal.
- Rear LEDs are turn signal only.
- 3" x 5.5" convex mirror dimensions for
a wider field of vision.
$239.00      
Easy installation:
- ALL motorcycles and includes adaptors for metric
motorcycles. Simply bolt the mirrors on, connect the
wires to the turn signals and you’re done. **Does not
work on Victory Cross Roads or Cross Country
LED Teardrop Turn Signal
Mirrors
Model 1220
Features:- 18 Super-bright Amber LEDs on
forward facing side of mirror housing behind a
clear lens- Front LEDs functions as low 1/2
intensityrunning lights & full intensity turn signals
- 3 rear facing Red LEDs in the mirrors lens.
They are invisible when the bike is off.
- Rear facing LEDs are to notify you that turn
signal has been left on. Not intended to be visible
by drivers behind you.
- Billet construction with bright
chrome plated frames.
- Simple bolt-on installation
- Increased visibility and safety.
- Includes 5/16" x 1-1/2" bolts, flat washers, &
lock washers. (Metric kits available below)
$169.95
Easy installation:
- ALL motorcycles. Simply bolt the mirrors on,
connect the wires to the turn signals & running
lights and you’re done.
Bare wire is ground, White wire is turn signal, Red
wire is running light 3 Wire 12VDC hook-up (32" of
wire with each mirror). Wire splicing required,
Wiring hardware not included.
** When replacing your stock turn signals with
LEDs a Load Equalizer may be required to slow
the flash rate back to normal.
**Optional Metric Adapter Kit available for
mounting mirrors to Honda, Kawasaki, & Yamaha
models.Adapter kit includes (2) each 10mm x1.25
and 8mm x 1.00 studs and nuts Mirror measures
6" long x 2-1/8" at the widest point
Euro Style Ellipse Motorcycle
Turn Signal Mirrors - Clear Lens
LEDs featured on the forward and rear facing
sides, everyone will see you coming and going.
Front amber LEDs function as running lights and
turn signals. rear facing LEDs in glass only
function as turn signals. Features clear lens and
comes with all the installation hardware needed
for H-D models. Optional Metric Adaptor kit is
available below.
$171.95
Model 1224
Features:- Euro style Clear lens with Amber
LEDs facing forward. Functions as Running Light
& Turn Signal.
- 10 Rear facing Red LEDs in mirror glass function
as turn signals only.
- Dual funtion LEDs. 1/2 brightness running lights
with full brightness turn signals
- Chrome plated.
- Simple bolt-on installation on most HD models.
- Increased visibility and safety.
- 2-5/8" x 5" flat glass mirror size
- Stem measures 7" long with wires running
through the stem
- 1-1/2" hollow (wire pass thru) mounting bolts &
washers included
** Not recommended to be used as your only turn
signal source.**
Easy installation:
- Most HD or other models where the mounting
bolt passes all the way through the handlebar
controls.
- 3 wire installation. Bare wire is ground, Red is
running light, White is Turn Signal
- Wire splicing required, Wiring hardware not
included.
Sequential LED Turn Signal
Motorcycle mirror set featuring
Amber LEDs
on the forward facing side of the
mirror. Arrows will flash from inside to outside in a
sequential pattern. Functions as turn signals only. Does
not have running light feature.
$149.95
Model 1228
Features: 3 Super-bright Amber LEDs arrows on
forward facing side of mirror housing behind a clear lens
- Front facing LEDs functions as full intensity turn signals.
- Flashes sequentially from inside to outside when turn
signal is activated.
- Billet construction with bright chrome plated frames.
- Simple bolt-through installation
- Increased visibility and safety.
- Mounts with 5/16" x 1.800" stud, flat washers, & lock
washers.
- 1 Year Manufacturer's warranty (p/n 34-9157)    
      
Installation:
Designed for motorcycles where the mirror bolt passes
through the perch housing. Nut tightens up from bottom
of stud under perch housing.
Simply bolt the mirrors on, connect the power wire to
the turn signal power wires and you’re done..
Single wire 12VDC hook-up. Ground is achieved through
the mounting stud.(24" of wire with each mirror).
Wire splicing required, Wiring hardware not included.
Mirror measures 6" long x 3-1/8" at the widest point

Sold in Pairs  *Not intended to be used as
only turn signals source on your
mototcycle.
LED Motorcycle Turn Signal
Mirrors -
With LEDs featured on the forward
facing side, everyone will see you coming. Front
amber LEDs function as running lights and turn
signals. Features amber lens and comes with all
the installation hardware needed for H-D models.
Optional Metric Adaptor kit is available below.
$155.95
Model 1230
Features:  Forward facing LEDs behind
amber lens
- Dual funtion LEDs. 1/2 brightness running lights
with full brightness turn signals
- Chrome plated.
- Simple bolt-on installation on most HD models.
Adaptors also available for metric models
- Increased visibility and safety.
- 2-5/8" x 5" flat glass mirror size
- Stem measures 7" long with wires running
through the stem
- 1-1/2" & 1-3/4" length mounting bolts included
Easy installation:
- Most HD motorcycles. Adaptor kit available for
most Metric models
- 3 wire installation. Bare wire is ground, Red is
running light, Silver is Turn Signal
- Wire splicing required, Wiring hardware not
included.
** When replacing your stock turn signals with
LEDs a Load Equalizer may be required to slow
the flash rate back to normal
LED Lighted Mirror Stem Covers
Easily add some cool auxiliary lighting to your stock
Harley Davidson handlebars with these new LED Lighted
Mirror Stem Covers. Featuring Amber L.E.D.’s along the
stem that function as motorcycle turn signals and
running lights. Chrome plated housings clamp securely
to stock mirror stems & simple with plug-&-play wiring
adapters that make connections a snap!
$116.95
Model 1232
Features:
- 6 Super-bright amber LEDs on each stem cover
- Amber lenses cover the amber LEDs
- Bright chrome plated finish
- 2 piece tough plastic housing that clamps around stock
mirror stem.
- Fits all OEM (stock) tapered, short stem HD
mirrorstems.
- Plug-N- Play wiring on all '03-'15 HD's except CVO
Fits:
'03-'15 H-D Original Equipment Tapered, Short-Stem
Mirrors. Will not fit stock CVO model mirrors or
accessory mirrors.
Sold in Pairs ** This is not the mirrors or stems. These
are only lighted stem covers.**
Add style and safety to your ride
with these LED Motorcycle Turn
Signal Mirrors.
With LEDs featured on both
sides of the mirror housing, everyone will see
you coming and going. Front amber LEDs function
as running lights and turn signals while the red
LEDs on the mirror side function only as turn
signals. This LED Motorcycle Mirror set comes
with all the instalation hardware needed for H-D
models. Optional Metric Adaptor kit is available
$195.95
Model 1234
Features:
Super-bright LEDs on both sides. Forward facing
Amber and rear facing Red LEDs
- LEDs are "sunlight visible".
- Clear lenses cover both front and rear LEDs
- Chrome plated frames.
- Simple bolt-on installation on most HD models.
Adaptors also available for metric models
- Increased visibility and safety.
- Red mirror side LEDs notifies when signal is left
on by mistake (not intended visible by drivers
behind you)
- Front LEDs act as running & turn signal.
- Rear LEDs blink with turn signals only.
- 3" x 5" mirror size - Stem measures 7" long
Easy installation:
- Most HD motorcycles. Adaptor kit available for
most Metric models
- 3 wire installation. Bare wire is ground,
Red is running light, Silver is Turn Signal
- Wire splicing required, Wiring hardware not
included.
** When replacing your stock turn signals with
LEDs a Load Equalizer may be required to slow
the flash rate back to normal.
Metric Adapter Kit $18.95
Dual Load Equalizer
Features:
- Equalizes load to turn
signals after changing to
LED bulbs or clusters.
- Reduces flash rate back
to "stock" flash speed.
$69.95
- Works on all 12 Volt DC
systems.
- Dimension: 2 1/4” L x 1
5/8” W x 5/8” H.
WELL, DON'T JUST
SIT THERE. IT'S
TIME TO REPLACE
YOUR OLD
MIRRORS AND
GET SOME LED
TURN SIGNAL
MIRRORS.
They
not only look
great, they give
you an added
measure of safety
and visibility when
riding. Order
below by Model
number or
Call
626-347-3366
Mirrors
Model 1220
$169.95
Rivco Turn Signal
Mirrors Chrome
Model 1222
$239.00
Euro Style Ellipse
Model 1224
$171.95
Model 1222
$239.95
Sequential LED
Turn Signal
Mirrors - Amber
Model 1228
$149.95
LED Motorcycle
Turn Signal
Mirrors w/Running
Lights
Model 1230
$145.95
Mirror Stems
Model 1232
$116.95
Signal Mirrors
Model 1234
$195.95
license Plate holders